Skip to content
24-month warranty on every SWEST unit — service and genuine parts included

Cold Room and Freezer Room Costs in Saudi Arabia: Comparing Quotes

Cold room and freezer room costs in Saudi Arabia depend on the products, operating temperature, room dimensions, site conditions and scope of work. A price per square metre or the price of a refrigeration unit cannot describe the complete project. This guide helps restaurant, retail and warehouse buyers establish what a quotation includes before comparing totals.

Cold rooms & warehouses
ShareWhatsAppXLinkedIn

01Define the purchase before asking for a price

A complete room or equipment supply only?

A quotation may cover a refrigeration unit alone, insulated panels and doors without equipment, or a room supplied, installed and commissioned. These are different purchases even when all are described as a cold room. Request a written scope covering clear internal dimensions, operating temperature, components, connections, testing and exclusions. Use SWEST’s cold room and freezer room services to frame the scope you want to discuss. Compare totals once each supplier is pricing the same room and taking responsibility for the same work.

Frozen storage and freezing incoming products are different duties

Specify the product, its arrival temperature, daily incoming quantity and the time allowed to reach the required storage condition. Holding goods that arrive frozen is a different duty from freezing batches of warm product. The word “freezer” is not a complete design brief. Storage conditions must follow the product and business requirements, with system selection reviewed against the intended duty. Choosing a larger unit without a design assessment does not establish that the room can freeze the load within the required time.

02What should a cold room quotation include?

Insulated enclosure, floor and doors

Ask for panel quantities, insulation material and thickness, facings and finishes, plus joint, penetration and wall-to-floor details. Confirm whether floor insulation and the final floor finish are included, and how the floor will accommodate handling loads, cleaning and storage equipment. Refer to the sandwich panels in the catalogue to identify the product under discussion, and the sandwich panel selection guide for comparison criteria. Panel supply cost is one part of a completed room.

Insulated sandwich panels for cold rooms and warehouses
Insulated panels are one quotation item: compare their specification, quantities and installation details.

Refrigeration, controls and site work

The quotation should identify the condensing unit, evaporator, controls, refrigerant and the conditions used for selection. Confirm included pipe lengths, electrical connections, control panels, sensors, alarms, drainage, supports, lifting and initial commissioning. For a room within a warehouse or steel hangar, distinguish building and civil work from refrigerated fit-out. “Installation included” needs a clear description of the work, connections and interfaces it covers.

03Why can equally sized rooms have different costs?

Floor area does not describe the refrigeration load

Two rooms with the same floor area may have different heights, operating temperatures, incoming product conditions, door activity and surroundings. A fixed capacity-per-square-metre rule is therefore an incomplete basis for comparing designs. The ASHRAE refrigerated-facility load reference groups loads into transmission, products, internal sources, entering air and equipment-related loads. Ask for the design assumptions behind the offered capacity, so the quotation has an identifiable selection basis.

Door arrangements and site conditions affect the scope

A room receiving goods on trolleys throughout the day may need a different opening and traffic arrangement from a store with occasional access. Compare a hinged insulated door and a sliding cold room door against actual handling needs, clear opening and available movement space. Whether the site is in Jeddah, Riyadh or the Eastern Province, review its actual condenser location, heat discharge, pipe routes, service access, electrical supply and preparation work. A city name or similar floor area does not justify transferring another project’s design conditions.

Insulated hinged door for cold rooms and freezer rooms
Door scope should identify the clear opening, opening arrangement, closing hardware and installation.

04A practical way to compare two quotations

Match each item against one common specification

Send the same brief to all suppliers. For each quotation record internal dimensions after insulation, operating temperature and product condition, enclosure and floor specification, door details, equipment models and rating conditions, and the included electrical, piping and drainage work. If an item is missing, request clarification rather than assuming it is included. For an alternative proposal, ask what changes in specification, performance and supply scope. This makes the price difference explainable.

Check exclusions, handover and warranty terms

Confirm tax, transport, lifting, civil work, incoming electrical supply and any applicable fees, including who provides each item. Request quotation validity, payment terms and the supply and installation programme. Warranty coverage, exclusions and service arrangements should be written rather than assumed. Agree on acceptance conditions: operating temperature, load condition, ambient conditions, measurement locations, test duration and pass criteria. Reaching a displayed temperature in an empty room does not automatically demonstrate performance under a different loading schedule.

05Where can you control the budget?

Resolve uncertain scope before equipment is ordered

Confirm dimensions, door movement and equipment locations before installation to reduce avoidable redesign and rework. Separate essential operating requirements from options that can be priced individually, such as monitoring and recording features appropriate to the business. Request clearly specified alternatives if the budget needs adjustment. Changes affecting floor insulation, safety provisions or essential installation work need a technical review before approval; removing a visible line item can change the delivered solution.

Consider operation and maintenance alongside purchase cost

If operating cost is important to the decision, request consumption data or an estimate with stated assumptions. Check cleaning access, service access and maintenance availability. Motor horsepower or equipment purchase price alone cannot establish an electricity bill or a savings percentage. Recording working hours, goods movement and maintenance needs from the outset makes the comparison more useful. Numerical savings claims need an identifiable calculation basis and operating conditions.

06Common pricing questions and your quotation brief

Is there a standard price per square metre or for a small room?

A rate per square metre can help compare a specific item, such as panels of one agreed specification, but cannot describe the complete cost of an operational room. A small room still needs a door, equipment, controls and installation, so scaling another project’s total by floor area is unreliable. For a preliminary estimate, ask for its assumptions, accuracy limits and items subject to site inspection. This guide does not present unverified price bands as current SWEST quotations.

What information should you send?

Prepare a plan, site photographs and available dimensions; product types and storage and arrival conditions; maximum stock and daily incoming quantities; working hours, door activity and handling methods. Add proposed electrical, drainage and outdoor-unit locations, required features and the target operating date. Include these details when you request a quotation from SWEST, and state whether you need equipment supply or a complete room. A clear scope produces a more useful estimate and a fairer comparison.

Have a project like this? Our engineering team in Jeddah runs the load calculation, proposes the solution, and comes back with a detailed quotation within one working day.

Help us improve the site: with your OK, we use Google Analytics to see which pages are useful to you. No ads, and we never sell your data. Privacy policy